page_banner

Bearing

  • Steam turbine tilting pad thrust bearing

    Steam turbine tilting pad thrust bearing

    Tilting pad thrust bearing is also called Mitchell type radial bearing. The bearing pad is composed of several bearing pad arc segments that can rotate around its fulcrum. The gap between each bearing pad arc segment serves as the oil inlet of the bearing pad. When the journal rotates, Each tile forms an oil wedge. This kind of bearing has good self-centering performance and will not cause instability. The pad can be tilted freely on the support point, and the position can be adjusted freely to adapt to the changes of dynamic conditions such as rotational speed and bearing load. The oil film force of each pad passes through the center of the journal, and it does not cause the shaft to slide. Therefore, it has high braking performance, can effectively avoid oil film self-excited oscillation and gap oscillation, and has a good limiting effect on unbalanced oscillation. The bearing capacity of a tilting pad radial bearing is the vector sum of the bearing capacities of each pad. Therefore, it has a lower bearing capacity than a single oil wedge hydrodynamic radial bearing, but has high rotation accuracy and good stability, and is widely used in high-speed and light-load machinery, such as steam turbines and grinders.
  • Sealing Ring of Generator Hydrogen Cooling System

    Sealing Ring of Generator Hydrogen Cooling System

    Sealing ring is an important part of hydrogen cooled generator. At present, double flow ring type sealing ring are generally used in China.

    In order to prevent the leakage of high-pressure hydrogen in the hydrogen cooled generator along the gap between the casing at both ends of the generator and the rotor, a sealing ring device is installed at both ends of the generator to seal the hydrogen leakage by the flowing high-pressure oil.